930-0073 - Carrier Access 930-0073 Network Controller - Wide Bank 28 case,...
- Part Number:
- 930-0073
- Model Number:
- 930-0073
- Make:
- CARRIER ACCESS
- Lead Time:
- Available
- Qty In Stock:
- Available
Carrier Access 930-0073 Network Controller - Wide Bank 28 case, 2 DS3 controllers, 8 WB DS1 Quad cards Simple Type: Network Controller
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- None Available
Specifications
- Accessories Included: User manual, 19 in./23 in. rack mounting brackets, Major/minor alarm cable connector, Connector release tool
- Alarms: External alarm contacts for critical and non-critical alarms; Normally open and normally closed pinout; Front panel alarm cutoff switch (ACO)
- Altitude: 0 to 15,000 ft. (0 to 4,572 m)
- Components: Controller unit (2), Quad DS1 units (8), Three port E1 unit (8)
- Depth: 10 in. (25.4 cm)
- Diagnostics: CSU Loopback/Loopup; C-bit Loopback/Loopup; NIU Loopback/Loopup; Internal BERT; Integrated NIU; Startup- and Self-test
- External Clock: 44.736 MHz (DS-3) or 51.84 MHz (STS-1)external clock
- Height: 1.75 in. (4.45 cm)
- High-Speed Interface:Channelized DS3: Line build out:Short: 0-50 ft.,Normal: 50-450 ft.; Line rate: 44.736 Mbps; Line code: Bipolar with three-zero substitution (B3ZS); Framing format: M23 and C-bit parity; Transmit Impedance: 75O ± 5% resistive, unbalanced; Transmit Jitter Attenuation: Meets ANSI T1.102; Transmit Amplitude: Meets ANSI T1.102 pulse mask with 0.36 to 0.85 Vp; Transmit Length (cable) 500 ft. to cross connect; Receive Sensitivity:–10 dB w/r DSX-3 120 mVp to 900 mVp input range with automatic gain control circuit
- Hight-Speed Interface:STS-1: Line rate: 51.84 Mbps ± 20 ppm; Line code: Bipolar with three-zero substitution; Transmit impedance: 75O ± 5% resistive, unbalanced; Framing: STS-1; Payload mapping:Asynchronous,VT 1.5 SPE for clear-channel transport; Transmitter: Meets the pulse mask and eye diagram interface signal requirements as specified by ANSI T1.102 and Telcordia GR-253-CORE for all cable lengths up to 450 ft. to cross-connect; Receiver:Accepts signals up to 500 ft. from the cross-connect that meets the criteria of ANSI T1.102 and Telcordia GR-253-CORE at the interface
- Input current: 0.75 amp maximum, FFO fully redundant system; 0.67 amp maximum, non-FFO
- Input voltage: –42 to –60 at 1 amp maximum
- Local Clock: On-board stratum 4E clock source
- Low Speed Interface:E1: Receive line rate: 2.048 Mbps; Receive impedance: 120O (balanced) meets minimum return loss requirements from ITU-T/G.703; Receive sensitivity: 600 mVp to 3.3 Vp input; (minimum signal tolerance referenced from nominal (3V) –13 dB); Transmit line rate: 2.048 Mbps. ± 50bps (32 ppm); Transmit amplitude: 3.0 V (nominal); Transmit pulse shape: Meets requirements of ITU-T/G.703; Transmit Jitter: Meets ITU-T/G.823 recommendations; Line Code: HDB3; Transparent to E1 framing or lack of framing (Lightning surge protection and power induction protection per FCC part 68 and GR-1089 -CORE)
- Low-Speed Interface:DS1: Line build out:0-655 ft.; Line framing:Transparent to DS4 or ESF; Line interfaces:Two 64-pin Amp connectors; Line rate: 1.544 Mbps ± 32 ppm; Line code:AMI or B8ZS selectable; Impedance: 100O ± 5% resistive, balanced; Transmit Jitter Attenuation: Meets ANSI T1.403,T1.102 and AT&T 62411; Transmit Amplitude: Pulse curve amplitude, 2.7 to 3.3 Vp per ANSI (T1.102 and T1.403); Transmit length (cable): 644 ft.ABAM or equivalent to cross-connect
- Management: RS-232 port for command line management; Ethernet port for SNMP and Telnet sessions; TL1 Alarm Correlation and Remote Provisioning
- Network Clock: Recovered from STS-1 or DS3 network receive signal
- Network Standards: ANSI:T1.102-1993;T1.107-1995, T1.403-1996; 404a-1994, T1.404a-1996,T1.105; ITU G.747 (E1 version); CCITT Recommendation V.11; Telcordia GR-499-CORE; AT&T 62411 (Stratum 4 enhanced T1 CPE)
- Nominal Power: –48 VDC
- Operating temperature range: 23 °F to 131 °F (-5 °C to 55 °C)
- Optional: Optional battery unit; Optional power converter/battery charger
- Options: MSO (Maintenance Service Option); FFO (Fan Faceplate Option)
- Performance Monitoring Alarms: Telcordia GR-474-CORE, GR-820-CORE
- Ports Included: Two independent –48VDC power input connectors, Four BNC coax connectors, Two 64-pin female champ connectors, BNC coax 44.768 MHz external clock input, 4-pin major/minor alarm connector, 9-pin female RS-232 management port, 25-pin female RS-232 TL-1 automatic outbound alarm; Message port:RJ45 10Base-T SNMP/Ethernet management port
- Power consumption: 36 W FFO, fully redundant system; 33 W non-FFO
- Protection: Internal fuseless overvoltage and overcurrent protection
- Rackmount: 19 in. (48.26 cm) or 23 in. (58.42 cm)
- Redundancy: Controller, DS3 1:1 and power conversion redundancy with second controller card; 1:7 or 4:28 DS1 electronics redundancy with spare Quad DS1 card; 1:7 or 3:21 E1 electronics redundancy with spare 3-port E1 card
- Regulatory and Certifications: NEBS Level 3 certified – type 2 and 4 (earthquake zone 4); Telcordia GR-63-CORE, GR-1089-CORE; North American Regulatory Standards UL 1950 Edition 3, Equipment compliance to current (1996) National Electrical Code (NEC); FCC Part 15 Class A, Part 68; CSA:Industry Canada CS-03, Canadian Safety Association Compliant; Japanese Approvals Institute for Telecommunications Equipment (JATE)
- Relative humidity (noncondensing): 0% to 98%
- Software Included: SNMP,TL1 and Telnet Agent embedded software; Command Line Interface embedded software; PilotTM GUI EMS
- Weight: 10 lb. (4.5 kg) fully loaded
- Width: 17 in. (43.2 cm)
Applications
- None Available
Aliases
- None Available
